C19160 Leaded Nickel Copper

C19160 Leaded Nickel Copper
Product Description

Backed with knowledgeable team of technocrats, we manufacture, export and supply a wide gamut of Leaded Nickel Copper. This metal is widely used for installation in different commercial and industrial sectors in places where leak-proof joints are needed. The provided metal is manufactured by our trained team of technocrats using optimal quality metal alloys, the offered metal is also vigorously tested on set quality parameters to enhance its flawlessness. Available in various designs, sizes and other specifications to meet the exact requirements of clients, this Leaded Nickel Copper is made available at most cost-effecting rates.

Features:

  • High conductivity

  • Precise melting point

  • Dimensional accuracy

  • Corrosion resistance

C19160 Leaded Nickel Copper

C19160 Leaded Nickel Copper alloy is a free-cutting bronze alloy, which is mainly used for manufacturing connectors in the electronics industry. The alloy is high on machining ability and is appreciated for high strength, electrical conductivity and corrosion resistance.

Applications:

  • Electrical Applications : Contacts, Sockets, Connector Pins
  • Density Applications : 0.320 lb/in3 at 68 F

Chemical Composition:

 

Cu (1)

Fe

Pb

Ni

P

Sn

Zn

Min/Max

Rem.

0.05

.8 - 1.2

.8 - 1.2

.15 - .35

0.05

0.5

Nominals

97.8

-

1

1

0.2

-

-

Fabrication:

Joining Technique

Suitability

Brazing

Good

Butt Weld

Fair

Capacity for Being Cold Worked

Good

Capacity for Being Hot Formed

Poor

Coated Metal Arc Welding

Not Recommended

Gas Sheilded Arc Welding

Not REcommended

Machinability rating

80

Oxyacetylene Welding

Not Recommended

Seam Weld

Not Recommended

Soldering

Excellent

Spot Weld

Not Recommended

Physical Properties:


US Customary

Metric

Melting Point - Liquidus

1980 F

1082 C

Melting Point - Solidus

1900 F

1038 C

Density

0.320 lb/in³ at 68 F

8.88 gm/cm³ @ 20 C

Specific Gravity

8.88

8.88

Electrical Conductivity

55 %IACS @ 68 F

0.318 MegaSiemens/cm @ 20 C

Thermal Conductivity

146 Btu ft/(hr ft2oF)at 68F

253.0 W/m ?? oK at 20 C

Modulas of Elasticity in Tension

18000 ksi

124100 MPa

Modulus of Rigidity

6000 ksi

12410 MPa

Sizes Available:

HOLLOW RODS

Min Bore Size 20 mm and Max OD 100 mm

ROUND RODS

8mm To 100 mm

HEX

10mm To 60mm

SQUARE

10mm To 60mm

FLAT

10mm Min Thickness and max Width 120mm

BILLETS

Up to 200 mm

INGOTS

As per Specification

 

 

 

 

 


Contact Us

217/218, GIDC, Phase-II, Okha-Rajkot Road, Dared, Jamnagar, Gujarat, 361004, India
Phone :+918068091203