- Kilograms/Kilograms
- 250
- , Kilograms/Kilograms
- 480 INR
- 450.00 - 500.00 INR
C62500 ALUMINUM BRONZE
Typical Uses
Industrial: Guide Bushings, Wear Strips, Cams, Dies, Forming Rolls, Sheet Metal Forming Dies, Wing Dies for Vertical Tube Benders, Bushings, Wear Plates for Plastic Molds, Welding Rod, Plastic Mold Components
Sizes Available :
ROUND RODS | 8mm To 70 mm |
HEX | 10mm To 60mm |
SQUARE | 10mm To 60mm |
FLAT | 10mm Min Thickness and max Width 120mm |
BILLETS | Up to 200 mm |
INGOTS | As per Specification |
CHEMICAL COMPOSITION
| Cu | Al | Fe | Mn |
Min./Max. | Rem. | 12.5-13.5 | 3.5-5.5 | 2.0 |
Nominal | 82.7 | 13.0 | 4.3 | - |
SPECIFICATIONS
End Product | Specification |
Rod, Welding | AWS A5.13 |
FABRICATION
Joining Technique | Suitability |
Soldering | Not Recommended |
Brazing | Fair |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Good |
Coated Metal Arc Welding | Good |
Spot Weld | Fair |
Seam Weld | Fair |
Butt Weld | Fair |
Capacity for Being Cold Worked | Not Recommended |
Capacity for Being Hot Formed | Excellent |
Forgeability Rating | 80 |
Machinability Rating | 20 |
PHYSICAL PROPERTIES
Product Property | US Customary | Metric |
Melting Point - Liquidus | 1925 F | 1052 C |
Melting Point - Solidus | 1917 F | 1047 C |
Density | 0.260 lb/in3 at 68 F | 7.2 gm/cm3 @ 20 C |
Specific Gravity | 7.210 | 7.21 |
Electrical Resistivity | 104 ohms-cmil/ft @ 68 F | 17.29 microhm-cm @ 20 C |
Electrical Conductivity | 10 %IACS @ 68 F | 0.059 MegaSiemens/cm @ 20 C |
Thermal Conductivity | 27 Btu ft/(hr ft2oF)at 68F | 46.7 W/m oK at 20 C |
Coefficient of Thermal Expansion | 9 10-6 per oF (68-572 F) | 16.2 10-6 per oC (20-300 C) |
Specific Heat Capacity | 0.090 Btu/lb/oF at 68 F | 377.1 J/kg oK at 293 K |
Modulas of Elasticity in Tension | 16000 ksi | 110000 MPa |
- 20000 Per Month
- 4 Week
217/218, GIDC, Phase-II, Okha-Rajkot Road, Dared, Jamnagar, Gujarat, 361004, India
Phone :+918037302166