C63600 Silicon Aluminum Bronze

C63600 Silicon Aluminum Bronze
C63600 Silicon Aluminum Bronze
Price And Quantity
  • 250
  • Kilograms/Kilograms,
  • 450.00 - 500.00 INR
  • 480 INR
    Product Description
    C63600 Silicon Aluminum Bronze

    The C63600 Silicon Aluminum Bronze possess good hot and cold workability, forging ability. The alloy is fabricated by bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

    Typical Uses :
    • Electrical :  Cold Headed Nuts, Cable Connectors, Components for Pole Line Hardware
    • Fasteners :  Screw Machine Products, Bolts
    • Industrial :  Valve Components, Nuclear Power Service

    Chemical Composition:

     

    Al

    As

    Cu

    Fe

    Pb

    Ni

    Si

    Sn

    Zn

    Min/Max

    3.0 - 4.0

    0.15

    Rem

    0.15

    0.05

    0.15

    0.7 - 1.3

    0.2

    0.5

    Nominals

    3.5

    -

    95.5

    -

    -

    -

    1

    -

    -

    Physical Properties:

    Product Property

    US Customary

    Metric

    Coefficient of Thermal Expansion

    9.4 ·10-6 per oF (68-572 F)

    16.9 ·10-6 per oC (20-300 C)

    Density

    0.301 lb/in3 at 68 F

    8.33 gm/cm3 @ 20 C

    Electrical Conductivity

    12 %IACS @ 68 F

    0.07 MegaSiemens/cm @ 20 C

    Electrical Resistivity

    86.4 ohms-cmil/ft @ 68 F

    14.36 microhm-cm @ 20 C

    Melting Point - Liquidus

    1890 F

    1032 C

    Modulas of Elasticity in Tension

    16000 ksi

    110000 MPa

    Specific Gravity

    8.33

    8.33

    Thermal Conductivity

    33.0 Btu · ft/(hr · ft2·oF)at 68F

    57.1 W/m · oK at 20 C

    Fabrication:

    Joining Technique

    Suitability

    Brazing

    Not Recommended

    Butt Weld

    Fair

    Capacity for Being Cold Worked

    Excellent

    Capacity for Being Hot Formed

    Fair

    Coated Metal Arc Welding

    Fair

    Gas Shielded Arc Welding

    Fair

    Machinability Rating

    40

    Oxyacetylene Welding

    Not Recommended

    Seam Weld

    Fair

    Soldering

    Not Recommended

    Spot Weld

    Fair

    Sizes Available

    ROUND RODS

    8mm To 70 mm

    HEX

    10mm To 60mm

    SQUARE

    10mm To 60mm

    FLAT

    10mm Min Thickness and max Width 120mm

    BILLETS

    Up to 200 mm

    INGOTS

    As per Specification

     



    Contact Us

    217/218, GIDC, Phase-II, Okha-Rajkot Road, Dared, Jamnagar, Gujarat, 361004, India
    Phone :+918068091203