C67300 MANGANESE BRONZE

C67300 MANGANESE BRONZE
C67300 MANGANESE BRONZE
Price And Quantity
  • 250
  • Kilograms/Kilograms,
  • 480 INR
  • 450.00 - 500.00 INR
    Product Description
    C67300 Manganese Bronze

    The C67300 manganese bronze is high in strength alloy with good bearing qualities. The alloy maintains high impact resistance with with good machinability by making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. It also resists squashing out under high loads and extreme wear applications.

    Typical Uses :

    • Fasteners: Fasteners, Lead Screw Nuts
    • Industrial: Gears and Cams, Wear Plates, Bushings, Seal Rings, Idler Pins, Piston Heads, Brearing Pins, Thrust Bearings, Sleeve Bearings, Propeller Shafts, Shaft Bushings, Clutch Bearings, Drive Shafts, Spindles, Pump Parts, Bearings
    • Marine:  Hardware, Valve Seats
    • Other:   Connecting Rods

    Equivelent Specifications:

    Specifications

    Designation

    UNS

    C66800

    UNS

    C67400

    UNS

    C67420

    Chemical Composition:

     

    Al

    Cu

    Fe

    Pb

    Mn

    Ni

    Si

    Sn

    Zn

    Min/Max

    0.25

    58.0 - 63.0

    0.5

    0.40 - 3.0

    2.0 - 3.5

    0.25

    0.50 - 1.5

    0.3

    Rem

    Nominals

    -

    60.5

    -

    1.7

    2.7

    -

    1

    -

    34.1

    Specifications:

    End Product

    Specification

    Bar

    SAE J461, J463

    Forgings

    SAE J461, J463

    Rod

    SAE J463, J461

    Shapes

    SAE J463, J461

    Fabrication:

    Joining Technique

    Suitability

    Machinability Rating

    70

    Physical Properties:

    Product Property

    US Customary

    Metric

    Coefficient of Thermal Expansion

    11 ·10-6 per oF (68-572 F)

    19.0 ·10-6 per oC (20-300 C)

    Density

    .30 lb/in3 at 68 F

    8.3 gm/cm3 @ 20 C

    Electrical Conductivity

    22 %IACS @ 68 F

    0.13 MegaSiemens/cm @ 20 C

    Melting Point - Liquidus

    1605 F

    874 C

    Modulas of Elasticity in Tension

    17000 ksi

    117200 MPa

    Specific Gravity

    8.3

    8.3

    Thermal Conductivity

    55 Btu · ft/(hr · ft2·oF)at 68F

    95.0 W/m · oK at 20 C


    Sizes Available

    ROUND RODS/BARS

    HEX

    10mm To 60mm

    SQUARE

    10mm To 60mm

    FLAT

    10mm Min Thickness and max Width 120mm

    BILLETS

    Up to 200 mm

    INGOTS

    As per Specification

     

     

     

     

     


    Contact Us

    217/218, GIDC, Phase-II, Okha-Rajkot Road, Dared, Jamnagar, Gujarat, 361004, India
    Phone :+918068091203