- Kilograms/Kilograms
- 250
- , Kilograms/Kilograms
- 450.00 - 500.00 INR
- 480 INR
We offer c66800 manganese bronze for producing pump parts and marine hardware. This alloy is suitable to operate under high load and speed bearing applications. It is commonly used to produce gears, cam shafts, drive shafts, sleeve bearings, piston head, idler pins, thrust bearing and spindles. The addition of manganese makes this alloy most wear resistant with great toughness and ductility. This alloy possesses bending, coining, knurling, roll threading, spinning and shearing, stamping, and swaging fabrication process. It also holds good hot and cold workability and forge-ability. The provided c66800 manganese bronze has good corrosion resistant when submerged in salty water.
Typical Uses :
- Industrial : Gears, Sealing Rings, Thrust Bearings, Bushings, Cams, Spindles, Bearings, Idler Pins, Connecting Rods, Drive Shafts, Valve Seats, Sleeve Bearings, Piston Heads.
- Marine : Pump Parts, Hardware, High Strength
Specifications | Designation |
UNS | C67300 |
UNS | C67400 |
UNS | C67420 |
Chemical Composition:
| Cu | Al | Fe | Pb | Mn | Ni | Si | Sn | Zn |
Min./Max. | 60.0-63.0 | 0.25 | 0.35 | 0.5 | 2.0-3.5 | 0.25 | .50-1.5 | 0.3 | Rem. |
Nominal | 61.5 | - | - | - | 2.7 | - | 1 | - | - |
Physical Properties:
Density | 0.300 lb/in3 |
Melting Range | 1690 1730 oF |
Coefficient of Expansion | (68 to 572oF) 11 ?in/in oF |
Thermal Conductivity | 55 Btu/ft h oF |
Electrical Conductivity | 21 % IACS |
Electrical Resistivity | 54 ? (circ mil/ft) |
Relative Magnetic Permeability | <1.02 |
Coefficient of Friction | 0.15 |
Sizes Available
ROUND RODS | 8mm To 70 mm |
HEX | 10mm To 60mm |
SQUARE | 10mm To 60mm |
FLAT | 10mm Min Thickness and max Width 120mm |
BILLETS | Up to 200 mm |
INGOTS | As per Specification |
- 20000 Per Month
- 4 Week
217/218, GIDC, Phase-II, Okha-Rajkot Road, Dared, Jamnagar, Gujarat, 361004, India
Phone :+918037302166