Home
Company Profile
Our Products
Contact Us
Select Language 
English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese
CC333G Nickel Aluminum Bronze
- Kilograms/Kilograms
- 250
- Kilograms/Kilograms
- 450.00 - 500.00 INR
ASTM B505
CC333G Nickel Aluminum Bronze 9D is available with salt water corrosion resistance. It also is resistant to cavitation and erosion. Along with the advantage of pressure tightness, this high strength alloy is excellent for welding and is available in many forms at a lower cost to you.
Typical Uses :
- Builders Hardware: Window Hardware
- Consumer: Piano Keys, Musical Instruments
- Electrical: Electrical Hardware
- Fasteners: Stuffing Box Nuts
Industrial: Pickling Equipment, Valve Guides, Piston Guides, Valve Seats, Pump Fluid Ends, Glands, Worms, Worms Wheels, Hot Mill Guides, Hand Gun Recoil Mechanisms, Landing Gear Parts, Air Craft Components, Wear Plates, Welding Jaws, Landing Gear Parts, Glass Molds, Machine Parts, Sewage Treatment Applications, Valve Components, Bearings, Bushings, Valve Bodies, Gears
Oil & Gas: Piping for Vertical Pump Columns, Firefighting and Fire Suppression Systems, Seawater Lift Pumps, Piping Layout, Flanges and Fittings, Discharge Elbows, Cooling Loops for Power Plants, Bronze Valve Bodies, Piping Systems, Desalination Equipment, Tube Sheets, Circulating Pumps and Pump Shafts, Fasteners and Hardware for Cooling towers.
Marine: Marine Applications, Covers for Marine Hardware, Ship Building, Marine Hardware
Ordinance: Government Fittings
Chemical Composition: | |||||
| Al | Cu | Fe | Mn | Ni |
Min/Max | 10.0-11.5 | 78.0 min | 3.0-5.0 | 3.5 | 3.0-5.5 |
Nominals | 11 | 80 | 4 | - | 4.3 |
Fabrication | |
Joining Technique | Suitability |
Brazing | Good |
Coated Metal Arc Welding | Not Recommended |
Gas Shielded Arc Welding | Not Recommended |
Machinability Rating | 40 |
Oxyacetylene Welding | Not Recommended |
Soldering | Excellent |
Physical Properties | ||
Product Property | US Customary | Metric |
Coefficient of Thermal Expansion | 9.0 10-6 per oF (68-572 F) | 16.2 10-6 per oC (20-300 C) |
Density | 0.272 lb/in3 at 68 F | 7.53 gm/cm3 @ 20 C |
Electrical Conductivity | 8 %IACS @ 68 F | 0.049 MegaSiemens/cm @ 20 C |
Electrical Resistivity | 122.8 ohms-cmil/ft @ 68 F | 20.41 microhm-cm @ 20 C |
Magnetic Permeability (As Cast) | 1.32 | 1.32 |
Magnetic Permeability (TQ50 temper) | 1.2 | 1.2 |
Melting Point - Liquidus | 1930 F | 1054 C |
Melting Point - Solidus | 1900 F | 1038 C |
Modulas of Elasticity in Tension | 16000 ksi | 110000 MPa |
Poisson's Ratio | 0.32 | 0.32 |
Specific Gravity | 7.53 | 7.53 |
Specific Heat Capacity | 0.1 Btu/lb/oF at 68 F | 419.0 J/kg oK at 293 K |
Thermal Conductivity | 24.2 Btu ft/(hr ft2oF)at 68F | 41.9 W/m oK at 20 C |
Sizes Available: | |
ROUND RODS | 8mm To 70 mm |
HEX | 10mm To 60mm |
SQUARE | 10mm To 60mm |
FLAT | 10mm Min Thickness and max Width 120mm |
BILLETS | Up to 200 mm |
INGOTS | As per Specification |
- 20000 Per Month
- 5-6 Week
217/218, GIDC, Phase-II, Okha-Rajkot Road, Dared, Jamnagar, Gujarat, 361004, India
Phone :+918037302166
